Wearing Compounds
DFense Blok™ and Wear Guard™ product lines are abrasion-resistant wearing compounds that protect many types of industrial equipment from abrasion damage with the addition of silicon carbide or alumina ceramic beads. Both product lines withstand punishment that would put unprotected equipment out of service, handling particulates from less than 1/16" to less than 1/2" and operating temperatures up to 450°F.
Stock No. Size SDS
DV11330 30 lb
DFense Blok™
DFense Blok™ is a revolutionary wear and abrasion protection epoxy compound formulated to significantly outlast traditional wear and abrasion products while also providing superior performance in the most severe conditions.
KEY FEATURES
-
4X better abrasion resistance than competition
-
7X better drop impact strength than ceramic tile
-
Superior sliding abrasion resistance
-
Withstands high impact conditions
-
Less prone to unexpected fractures
-
Open Time: 25 Minutes
-
Gap Fill: .25" - 1.5"+
-
Functional Cure: 4 - 5 Hours
-
Color: Gray
-
Mix Ratio (volume): 2 : 1
Stock No. Size SDS
DV11350 9 lb
DFense Blok™ Fast Cure (FC)
A faster curing version of the revolutionary wear and abrasion protection epoxy compound DFense Blok™. Formulated to significantly outlast traditional wear and abrasion products while getting equipment back in service in 2 hours.
KEY FEATURES
-
Faster curing version of DFense Blok™
-
Allows equipment to be returned to service in 2 hours
-
Less prone to unexpected fractures
-
Non-sagging
-
Open Time: 45 Minutes
-
Functional Cure: 2 - 3 hours
-
Color: Gray
-
Mix Ratio (volume): 2 : 1
Stock No. Size SDS
DV11320 1 lb
DFense Blok™ Quick Patch
The only ceramic bead-filled wear & abrasion epoxy formulated for emergency repairs, even in severe conditions.
KEY FEATURES
-
Eliminates downtime with the exceptional fast cure – 30 minutes functional cure
-
Applies to vertical surfaces (up to 1”) and overhead surfaces (up to ¾”)
-
Repairs holes, leaks and cracks
-
Open Time: 15 Minutes
-
Color: Gray
-
Mix Ratio (volume): 1 : 1
Stock No. Size SDS
DV11340 1 lb
DFense Blok™ Surface Wetting Agent
DFense Blok™ Surface Wetting Agent is a thixotropic epoxy gel system that improves the ease of application and cured adhesion properties of DFense Blok™.
KEY FEATURES
-
Zero wait time before applying DFense Blok™
-
Allows superior adhesion to vertical and overhead surfaces
-
Use in place of expanded metal
-
Orange color for easy visual inspection
-
Open Time: 25 Minutes
-
Color: Orange
-
Mix Ratio (volume): 2 : 1
Stock No. Size SDS
DV11470 30 lb
Wear Guard™ Fine Load
Micro-high-alumina, ceramic bead-filled, high-density epoxy system for equipment protection.
KEY FEATURES
-
Handles particulate smaller than 1/8”
-
Can be troweled to form a smooth surface
-
Excellent for dust particulate applications, slurry pumps, scrubbers, screens, and screw conveyors
-
Withstands operating temperatures as high as 300°F
-
Outstanding resistance to a wide range of chemicals
-
Gap Fill: .25" - 1.5"+
-
Functional Cure: 6 - 8 hours
-
Color: Grey
-
Mix Ratio (volume): 2 : 1
Wear Guard™ High Load
Stock No. Size SDS
DV11490 30 lb
High-alumina, ceramic bead-filled epoxy system for outstanding abrasion resistance to processing equipment
KEY FEATURES
-
Handles particulate greater than 1/8
-
Operational temperature resistance to 300ºF
-
Exceptional resistance to a wide range of acids, bases, saturated salt solutions, oils, and many other chemicals
-
Trowels onto overhead or vertical surfaces without sagging
-
Ideal for repairing scrubbers, ash handling systems, pipe elbows, screens, and chutes
-
Functional Cure: 6 - 8 hours
-
Color: Grey
-
Mix Ratio (volume): 2 : 1
Stock No. Size SDS
DV11460 30 lb
Wear Guard™ High Impact
High density micro alumina ceramic beaded-filled epoxy system with a felxible additive for superior impact and abrasion resistance
KEY FEATURES
-
Non sagging putty in a creamy consistency
-
High compression and impact strength
-
Service temp to 300°F
-
Best adhesion to metal of any beaded product
-
Flexible epoxy system
-
Functional Cure: 6 - 8 hours
-
Color:Dark Grey
-
Mix Ratio (volume): 2.5 : 1
Stock No. Size SDS
DV11483 24 lb
Wear Guard™ High Temp
High-Temperature and high-density, ceramic bead-filled epoxy system for maximum wear and abrasion resistance in processing equipment.
KEY FEATURES
-
Heat-cured, trowelable system that gives up to 30% improvement over conventional wear compounds
-
Withstands continuous service temperatures to 450°F
-
Unmatched resistances to many acids, bases, salts, and solvents
-
Excellent abrasion resistance to all sizes of materials and particulate in high heat applications such as exhausters, pulverizers, and cyclones
-
Color: Grey
-
Mix Ratio (volume): 6 : 1
Stock No. Size SDS
DV11450 9 lb
ComboWear FC (Fast Cure)
High-tech, three-component (2 bead sizes plus silicon carbide) compound for repairing process equipment quickly and returning it to service in as little as 1½hours.
KEY FEATURES
-
Excellent adhesion to metal, ceramic, and concrete surfaces
-
Sets up in 1½ hours with full cure in just 8 hours
-
Bonds to damp surfaces
-
Ideal for cracks in large coal fuel lines
-
Open Time: 7 Minutes
-
Gap Fill: .25" - 1.5"+
-
Functional Cure: 2 - 3 hours
-
Color: Grey
-
Mix Ratio (volume): 2 : 1