top of page
devcon_logo2.png
precision.png

Corrosion Repair Compounds


Ceramic filled epoxy technology used to make permanent repairs to pumps, shafts, pipes and tanks where a corrosion-resistant polymer is needed to protect all metals against corrosion and erosion in slurry applications. These products apply easily with a brush or trowel.
fam_img_124.jpg

Stock No.     Size        SDS

DV10760　     1 lb

DV10770          2 lb

Titanium Putty

High-performance, non-rusting titanium-reinforced epoxy engineered for making repairs to machinery and equipment that can be precision machined. Withstands heavy loads in hard chemical environments.

​

KEY FEATURES

  • Excellent temperature resistance (350°F)

  • High compressive strength (15,200 psi)

  • Resistance to chemicals and most acids, bases, solvents, and alkalis

  • Qualifies under Mil Spec MIL-PRF-24176C, Type I

  • Listed under NSN stock #8030-01-335-0562

  • Open Time: 21 Minutes

  • Gap Fill: .0625" - .075"

  • Functional Cure: 16 Hours

  • Color: Grey

  • Mix Ratio (volume): 3 : 1

Brushable Ceramic Blue
fam_img_127.jpg

Stock No.     Size        SDS

DV11765　      2 lb

Low-viscosity, alumina-filled, brushable epoxy compound, when applied to a 15-20 mil coating, provides a smooth protective barrier against wear, abrasion, corrosion, erosion, and chemical attack.

​

KEY FEATURES​

  • Temperature range up to 350°F

  • 3 colors (red blue white) to insure uniform coating

  • White is NSF-certified for use in potable water applications

  • Low-friction surface reduces turbulence, wear, and cavitation

  • Red and white formulas are acceptable for use in meat and poultry plants

  • Outstanding chemical resistance to acids, solvents, and alkalis

  • Open Time: 40 Minutes

  • Gap Fill: .0625" - .075"

  • Color: Blue

  • Cure Time: 16 Hours

  • Mix Ratio (volume): 3.4 : 1

​

Brushable Ceramic Red
fam_img_126.jpg

Stock No.     Size        SDS

DV11760　      2 lb

Low-viscosity, alumina-filled, brushable epoxy compound, when applied to a 15-20 mil coating, provides a smooth protective barrier against wear, abrasion, corrosion, erosion, and chemical attack.

​

KEY FEATURES

  • Temperature range up to 350°F

  • 3 colors (red, blue, white) to insure uniform coating

  • White is NSF-certified for use in potable water applications

  • Low-friction surface reduces turbulence, wear, and cavitation

  • Red and white formulas are acceptable for use in meat and poultry plants

  • Outstanding chemical resistance to acids, solvents, and alkalis

  • Open Time: 40 Minutes

  • Gap Fill: .0625" - .075"

  • Color: Red

  • Cure Time: 16 Hours

  • Mix Ratio (volume): 3.4 : 1

Brushable Ceramic White
fam_img_128.jpg

Stock No.     Size        SDS

DV11770　      2 lb

Low-viscosity, alumina-filled, brushable epoxy compound, when applied to a 15-20 mil coating, provides a smooth protective barrier against wear, abrasion, corrosion, erosion, and chemical attack.

​

KEY FEATURES

  • Temperature range up to 350°F

  • 3 colors (red blue white) to insure uniform coating

  • White is NSF-certified for use in potable water applications

  • Low-friction surface reduces turbulence, wear, and cavitation

  • Red and white formulas are acceptable for use in meat and poultry plants

  • Outstanding chemical resistance to acids, solvents, and alkalis

  • Open Time: 21 Minutes

  • Cure Time: 16 Hours​

  • Gap Fill: .0625" - .075"

  • Color: White

  • Mix Ratio: 5.6 : 1

fam_img_125.jpg

Stock No.     Size        SDS

DV11700　      3 lb

Ceramic Repair Putty

Smooth, trowelable, alumina-filled epoxy compound for rebuilding and protecting processing equipment exposed to corrosion, erosion, cavitation, chemicals, and acids.

​

KEY FEATURES

  • Temperature range up to 350°F

  • Excellent for filling voids and rebuilding metal castings

  • Qualifies under Mil Spec DOD-C-24176B(SH) Type I II

  • Open Time: 25 Minutes

  • Cure Time: 16 Hours​

  • Gap Fill: .0625" - .075"

  • Color: Dark Blue

  • Mix Ratio (volume): 3.3 : 1

bottom of page