top of page
devcon_logo2.png
Metal repaire.png
Metal Repair Products

Metal-filled epoxy technology that allow for fast economical permanent repairs to power plant and mining equipment. They can be machined, tapped and drilled, and corrosion resistant to harsh chemicals. These products are available in pourable versions that can be used to provide accurate detail reproductions for short run prototype mold patterns, holding fixtures and forming dies.
fam_img_101.jpg

Stock No.     Size        SDS

DV10110 　    1 lb

DV10120　     4 lb

Plastic Steel® Putty (A)

Plastic Steel® is the original metal-filled epoxy putty used for hundreds of routine maintenance, production, and tooling applications. Patch and repair areas where welding or brazing would be undesirable or impossible.
 

KEY FEATURES

  • Bonds to most metals, concrete and some plastics

  • Cures at room temperature and forms a tough durable metallic mass that can be drilled, tapped, machined or painted

  • Excellent resistance to oil, gasoline, water and many chemicals

  • Listed under NSN Stock #8030-00-903-6545; #8030-00-962-4430

  • Open Time: 45 minutes

  • Functional Cure: 16 hours

  • Color: Dark Gray

  • Mix Ratio (volume): 2.5 : 1

fam_img_102.jpg

Stock No.     Size        SDS

DV10210 　    1 lb

DV10220　     4 lb

DV10230　    25 lb

Plastic Steel® Liquid (B)

Steel-filled liquid epoxy that can be cast over models for accurate detail reproduction when making holding fixtures, light-gauge forming dies and molds.

​

KEY FEATURES

  • Can be machined to close tolerances

  • Low viscosity and high compressive strength

  • Ideal leveling compound for machinery and equipment

  • Listed under NSN Stock #8030-000-051-4012; #8030-00-670-8555

  • Qualifies under Mil Spec MMM-A-1754

  • Open Time: 45 Minutes

  • Functional Cure: 16 hours

  • Color: Dark Gray

  • Gap Fill: .0625" - .075"

  • Mix Ratio (volume): 3 : 1 

​

fam_img_103.jpg

Stock No.     Size        SDS

DV10240　      1 lb

Plastic Steel® 5 Minute® Putty (SF)

Fast-curing, steel-filled epoxy for dependable emergency repairs in less than one hour.

​

KEY FEATURES

  • Hardens in one hour

  • Mixes, applies, and cures at temperatures as low as 40°F

  • Cures to a tough, steel-filled material

  • Can be machined, drilled, tapped, or sanded

  • Listed under NSN stock #8030-00-229-8734

  • Open Time: 5 Minutes

  • Functional Cure: 1 hours

  • Color: Dark Gray

  • Gap Fill: .0625" - .075"

  • Mix Ratio (volume): 1 : 1

fam_img_105.jpg

Stock No.     Size        SDS

DV10270　      1 lb

Stainless Steel Putty  (ST)

Stainless steel-filled epoxy putty for patching, repairing and rebuilding stainless steel food processing equipment.

​

KEY FEATURES

  • Non-rusting

  • Bonds to ferrous and non-ferrous metals

  • NSF certified for potable water applications

  • Acceptable for use in meat and poultry plants

  • Listed under NSN stock #8030-00-268-7934

  • Open Time: 5 Minutes

  • Functional Cure: 16 hours

  • Color: Grey

  • Gap Fill: 0.0625" - .075"

  • Mix Ratio (volume): 3.75 : 1

Aluminum Putty (F)
fam_img_107.jpg

Stock No.     Size        SDS

DV10610　      1 lb

DV10620         3 lb

​

Aluminum-filled epoxy putty for dependable non-rusting repairs to aluminum castings, machinery and equipment widely used in HVAC applications.

​

KEY FEATURES

  • Repairs air conditioning system components

  • Listed under NSN Stock #8030-00-051-4511; #8030-00-670-8553

  • Bonds to aluminum and many other metals

  • Fills porosity in aluminum castings

  • Can be machined drilled or tapped using conventional metalworking tools

  • Qualifies under Mil Spec MIL-PRF-24176C, Type II

  • Open Time: 60 Minutes

  • Functional Cure: 16 hours

  • Color: Aluminum

  • Gap Fill: 0.0625" - .075"

  • Mix Ratio (volume): 4 : 1

fam_img_108.jpg

Stock No.     Size        SDS

DV10710　      1 lb

DV10720         3 lb

​

Aluminum Liquid (F-2)

Aluminum-filled pourable epoxy for making molds, patterns, and holding fixtures.

​

KEY FEATURES

  • Mixes and pours easily

  • Hardens in just over 1 hour; cures in 16 hours

  • Can be cast over models for accurate reproduction of details

  • Low viscosity permits reproduction of delicate or intricate parts

  • Listed under NSN stock #8030-00-229-8740; #8030-00-159-5032

  • Open Time: 75 Minutes

  • Functional Cure: 16 hours

  • Color: Aluminum

  • Gap Fill: .0625" - .075"

  • Mix Ratio (volume): 5 : 1

fam_img_114.jpg

Stock No.     Size        SDS

DV11800　      1 lb

Underwater Repair Putty (UW)

High-performance technology for repairing, patching, and rebuilding equipment in habitually wet environments, including under water.

​

KEY FEATURES

  • Penetrates wetness to bond securely to steel, iron, aluminum, brass, bronze, concrete, wood, and some plastics

  • Invaluable for use in pulp and paper mills, wastewater treatment plants, and marine environments

  • Eliminates the need for substrate to be thoroughly dry before repair

  • Non-rusting; easy-to-mix and apply

  • Cures in temperatures as low as 40°F

  • Listed under NSN Stock# 8010-01-120-8753

  • Open Time: 45 Minutes

  • Functional Cure: 24 hours

  • Color: Grey

  • Gap Fill: .0625" - .075"

  • Mix Ratio (volume): 1 : 1

​

fam_img_100.jpg

Stock No.     Size        SDS

DV10050　      3 lb

Carbide Putty

Silicon carbide-filled epoxy putty for economical protection against wear and abrasion.

​

KEY FEATURES

  • Excellent abrasion resistance in aggressive industrial environments

  • Handles particulates less than 1/16

  • Withstands continuous service temperatures to 250ºF

  • Open Time: 50 Minutes

  • Functional Cure: 16 hours

  • Color: Grey

  • Gap Fill: .25" - 1.5" +

  • Mix Ratio (volume): 4 : 1

fam_img_104.jpg

Stock No.     Size        SDS

DV10260　      1 lb

Bronze Putty (BR)

Bronze-filled epoxy putty for repairing bronze and brass bushings, shafts, castings and equipment parts.

​

KEY FEATURES

  • Repairs and rebuilds areas where brazing would be undesirable or impossible

  • Bonds securely to bronze alloys, brass, copper, and ferrous metals

  • Uses conventional metalworking tools to machine, drill, tap, or grind

  • Listed under NSN stock #8030-00-333-4534

  • Open Time: 35 minutes

  • Functional Cure: 16 hours

  • Color: Bronze

  • Gap Fill: .0625" - .075"

  • Mix Ratio (volume): 3 : 1

fam_img_111.jpg

Stock No.     Size        SDS

DV11410　      1 lb

DV11420         3 lb

Wear Resistant Putty (WR-2)

Smooth, non-rusting, all-purpose epoxy putty for repairs requiring low-friction finishes, such as machine lathe beds.

​

KEY FEATURES

  • Bonds to steel, iron, aluminum, ceramic, concrete, brass, and some plastics

  • Contains wear-resistant fillers for low friction applications

  • Also available in liquid form

  • Listed under NSN stock #8030-00-229-8735; #8030-00-229-8736

  • Open Time: 45 Minutes

  • Functional Cure: 16 hours

  • Color: Dark Grey

  • Gap Fill: .0625" - .075"

  • Mix Ratio (volume): 4 : 1

fam_img_109.jpg

Stock No.     Size        SDS

DV10780　     3/4 lb

FasMetal™ Putty

High-performance, alumina-filled epoxy for making fast, dependable emergency repairs to leaks in pipes carrying ores, coal, cement, sand, and gravel.

​

KEY FEATURES

  • Hardens in 5 minutes

  • Economical and convenient

  • Applies in temperatures as low as 40°F

  • Open Time: 4 Minutes

  • Functional Cure: 1 hours

  • Color: Dark Grey

  • Gap Fill: .0625" - .075"

  • Mix Ratio (volume): 1 : 1

Zip Patch™
fam_img_113.jpg

Stock No.     Size        SDS

DV11500    4"x9" patch

High-technology, adhesive-impregnated patching system that cures at room temperature and makes permanent, waterproof field repairs to pipes, tanks, and containers.

​

KEY FEATURES

  • Easy-to-use, fast-setting patch kit

  • Hardens to a tough, durable waterproof finish in minutes

  • Excellent adhesion to iron, steel, stainless steel, titanium, fiberglass, aluminum, wood, ceramics, composites, acrylics, PVC, and most other plastics

  • Minimal surface preparation

  • Listed under NSN Stock #8040-01-309-1064

  • Open Time: 5 Minutes

  • Functional Cure: 1 hours

  • Color: Brown

fam_img_210 (1).jpg

Stock No.     Size        SDS

DV19510         1pt

Cleaner Blend 300

Safe, multi-purpose degreaser for use on heavy grease and oil deposits on metal.

​

KEY FEATURES

  • Needs no rinsing; leaves no residue

  • Evaporates fast

  • Ideal for dip tanks

​

bottom of page